My Cart:

0
You have no items in your shopping cart.

0

Welcome to KilnParts.com, your source when you need parts or just help fixing your kiln

Skutt Current Sensor

Availability: In stock

Regular Price: $43.00

Special Price $40.85

Quick Overview

The current sensor is a device that will allow you to read the Voltage and Amperage of your kiln through use of the Diagnostic Menu options on your controller. It is to be used in conjunction with the KilnMaster and GlassMaster 700 Boards. If your kiln was manufactured with a 700 board than you should already have a current sensor installed in your kiln.
  • OR

    Details

    KilnParts.com Part Numbers
    1000567
    Skutt Part Numbers
    2648

    The current sensor is a device that will allow you to read the Voltage and Amperage of your kiln through use of the Diagnostic Menu options on your controller. It is to be used in conjunction with the KilnMaster and GlassMaster 700 Boards. If your kiln was manufactured with a 700 board than you should already have a current sensor installed in your kiln.

    In order to operate properly, the sensing coil of the current sensor must be placed over some of the wires that connect the power cord terminal block to the kiln’s relays. Usually the kiln will have two or three relays. It is only necessary to pull one wire from each relay and thread it through the sensing coil, then reconnect the wires.

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.