My Cart:

You have no items in your shopping cart.


Welcome to, your source when you need parts or just help fixing your kiln

Skutt Element for KM1627-3” PK

Availability: In stock

Regular Price: $48.00

Special Price $45.60

Quick Overview

SELECT WHICH ELEMENTS YOU NEED WHEN ADDING TO YOUR CART. All elements sold at are original factory elements made by Skutt. The element package contains; one element, straight pins, two replacement porcelain insulators and printed instructions. This is a PK (Production Kiln) element so you will not get crimp on connectors since PK kiln element connectors are re-usable. Do not buy this element unless your kiln has a “-PK” in the model number.

* Required Fields

Regular Price: $48.00

Special Price $45.60

  • Details

    Wiring Diagram for KM1627-3PK Single Phase and Three Phase

    Element Installation Instruction Sheet

    Replacing an element in Skutt Kilns – Instructions from – Includes Pictures

    Changing an Element

    All elements sold at are original factory elements made by Skutt Ceramics, Inc. These are NOT after market elements. The element package contains; one element, straight pins, one replacement porcelain insulator and printed instructions. Please note: PK Kilns use screw type connectors that are re-usable, so you will NOT need new element connectors unless your current connectors are corroded or broken.

    If your firing times are taking longer than they used to or you are almost reaching temperature but getting an "ERR1" message on your automatic Skutt kiln it's probably time to change your elements.

    A few signs your elements need to be replaced:
    - The coils that make up your elements are slumped over and bunched up in the brick channels.
    - The resistance of your elements is more than 1.5 ohms over the factor spec. For information about how to test resistance download this PDF. Once you know that take a look at the KM Resistance and the KS Resistance sheets.
    - You can see a visible break in an element.
    - Your automatic kiln shows an "ERR1" after firing but comes very close to it's target temperature.

    If you're not sure whether or not your kiln needs new elements take a few minutes to watch some videos about diagnossing common kiln problems here.

    If you prefer to read about diagnostic tests take a look at our PDF library here. You will find useful information in the "Diagnostic Tests" and "Troubleshooting" sections.


    Voltage, Phase and Position Skutt Part Numbers Part Numbers
    240V 3PH – Top/Bottom 0409 1000001
    240V 3PH – Intermediate 0410 1000002
    240V 3PH – Center 0411 1000003
    208V 3PH – Top/Bottom 0406 1000004
    208V 3PH – Intermediate 0407 1000005
    208V 3PH – Center 0408 1000006


    KM1627-3" PK - All Voltages and Phases
    Element Type Position (top down) Quantity Required
    Top/Bottom 1,2,11,12 4
    Intermediate 3,4,9,10 4
    Center 5,6,7,8 4


    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.