My Cart:

0
You have no items in your shopping cart.

0

Welcome to KilnParts.com, your source when you need parts or just help fixing your kiln

LID OR BOTTOM SLAB FOR ALL 8 SIDED SKUTT KILNS

Availability: In stock

$150.00

Quick Overview

If your kiln brick is damaged and needs to be replaced use these original factory replacement bricks. Bricks are not glued in and can be removed once the band around the kiln is loosened.

* Required Fields

$150.00
  • Details

    KilnParts.com Part Numbers
    1000380 – Lid – 2.5” Thick
    1000381 – Bottom Slab – 2.5” Thick
    1000389 - Lid – 3” Thick
    1000390 – Bottom Slab – 3” Thick
    Skutt Part Numbers
    0260 - Lid – 2.5” Thick
    0261 – Bottom Slab – 2.5” Thick
    0383 - Lid – 3” Thick
    0817 – Bottom Slab – 3” Thick

    How do I know if I should repalce a damaged brick?

    Replacing a broken brick can extend the life our your elements because the elements are supported by the bricks and as the elements get hot they also get softer and can sag if not supported. If the damage to the brick is above the element channel it is not normally necessary to replace it unless the damage is severe. If the damage is below the element channel it is advisable to replace the brick before the element is damaged.

    Do I need to replace my element(s) if I replace a brick(s)?

    It depends. If your elements are fairly new they are probably still flexible enough to carefully remove from the channels and then replace them when you are finished replacing the broken brick. If your elements are older they will probably be too brittle to remove and replace. Elements get brittle after being fired multiple times so if you are unsure, it's best to have the elements on hand before you start replacing bricks so you do not have to order them separately.

    In order to replace terminal bricks (the bricks with pigtails running through them into the control box) you will need to remove the element completely. If you are repalcing a terminal brick you will need a new element unless the kiln is a PK model with removable element connectors. Element connectors used on non-PK Skutt Kilns can't be removed and need to be cut to be removed.

    Our recommendation is to always have an element on hand when replacing bricks since it is very easy to inadvertently break an element.

    For full instructions please download the PDF from the "PDF Files" tab above and watch the video under "Product Videos" in the tab above. If you still have questions feel free to contact us for help!

    Replacing a Brick in Skutt Kilns – Instructions from Skutt

    Replacing a Brick in Skutt Kilns – Instructions from KilnParts.com – Includes Pictures

    Changing a Brick in a Skutt Kiln

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.